C & R Refrigeration
Ice making and refrigeration components
P.O. Drawer 2257 • Center, Texas 75935
Phone: (936) 598-2761 • Fax: (936) 598-7858
Shipping Address:
405 Center Street
Center, Texas 75935
Parts Hotline: 1 (800) 438-6182
Refrigeration effect for the MINI-IQF freezer is created by use of plate finned coil heat exchanger. Refrigerant is circulated through the coil to absorb the heat from the product and other sources in the operation of the freezer.
Water defrost is standard, hot gas is optional at added cost. Defrost timing is dependent upon product, plant conditions, etc.
Air is distributed and circulated over the coil and through the product belts using axial fans, directly connected to an electric motor. Fans are selected and operated to provide maximum effectiveness both for refrigerant coil and product heat exchange.
The system is built with a hot dip galvanized steel structural base. Interior skin is stainless steel, welded gas tight, and is fully insulated with 5" polyurethane, and vapor barrier. The freezer doors are stainless steel, located as required for access and maintenance. The exterior is clad with either stainless or glassboard panels, with stainless battens and screws.
The panel will be located at the discharge end of the system, and will include starters and controls for all motors and other items requiring such control. All possible internal wiring will be factory installed, requiring only power and control connections. (Note: the panel may be shipped loose for field mount if desired).
Package Refrigeration System. Skid mounted system to include a new screw compressor package, high-pressure receiver, accumulator and evaporative condenser. Valves, pipe controls for R-22 or ammonia service.
Normal ship time is 12 to 14 weeks.
We appreciate your interest in our products and if you have any questions please do not hesitate to call me; I will be more than glad to help you.

|
MODEL NUMBER |
500 |
1000 |
1500 |
NOTES |
| DIMENSIONS GIVEN ARE APPROXIMATE NOT FOR CONSTRUCTION.
REFER TO CONTRACT FOR CONSTRUCTION DIMENSIONS. |
||||
| LENGTH (A) |
13’– 0" |
18’– 0" |
20’ – 0" |
|
| WIDTH (B) |
7’– 6 " |
7’– 6" |
8’ – 6" |
|
| HEIGHT (C) |
9’– 2" |
9’– 0" |
9’ – 0" |
|
| OVER ALL LENGHT (D) |
16’– 9" |
21’– 6" |
23’ – 0" |
|
| OVER ALL WIDTH (E) |
8’– 9" |
8’– 6" |
9’– 6" |
|
| BELT HEIGHT INLET (F) |
60" |
60" |
66" |
|
| BELT HEIGHT OUTLET (G) |
42" |
42" |
48" |
|
| BELT WIDTH (H) |
35" |
35" |
48" |
|
| WEIGHT |
5000LBS |
|
GENERAL INFORMATION FOR C&R REFRIGERATION, Inc. MINI IQF TUNNEL FREEZERS |
|||||
|
MODEL NUMBER |
UNIT |
NOTE |
500 |
1000 |
1500 |
| Capacity (Basic Veg) |
LB/HR |
** |
500 |
1000 |
1500 |
| Belt Width |
FT |
3 |
3 |
4 |
|
| Product Inlet Temperature |
ºF |
40 |
40 |
40 |
|
| Product Outlet Temperature |
ºF |
0 |
0 |
0 |
|
| Refrigeration Requirement |
TR |
12 |
22 |
28 |
|
| Evaporator Temperature |
ºF |
* |
-35 |
-35 |
-35 |
| Number Freezer Fans |
2 |
2 |
3 |
||
| Freezer Fan H.P. (EA) |
HP |
7.5 |
7.5 |
7.5 |
|
| Belt Drive System |
2 |
2 |
2 |
||
| Hydraulic Pump Motor |
HP |
1 |
1 |
1 |
|
| Defrost Water Req. @15psig |
GMP |
100 |
100 |
100 |
|
| Power Control |
++ |
||||
| Other |
*** |
||||
NOTES:
* MEASURED AT COIL OUTLET – LIQUID RECIRCULATED COILS.
** RATED CAPACITY WILL VARY DIRECTLY WITH BELT LOADING, FREEZING TIME OF PRODUCT.
*** MEETS USDA REQUIREMENTS
++ POWER: 3/60/460, CONTROL 1/60/120.
